How to Make Jewelry Cleaner

Learn how to make jewelry cleaner with household products to keep your baubles sparkling!

Keeping your jewelry clean and sparkling can be a bit of a challenge, especially if you’re a big jewelry person! But with a few simple ingredients and a bit of know-how, you can make your own DIY jewelry cleaner. This will leave your rings, bracelets, and necklaces looking as good as new. Whether it’s your wedding rings, engagement ring, or any other piece of jewelry, this cleaner is the best way to take care of all of your treasures.

What you’ll need to make Jewelry Cleaner:

• Dish detergent
• Salt
• Baking soda
• Spray bottle
• Disposable aluminum foil container
• Soft cloth (Lint-free cloth works best!)
• Small bowl
• Soft toothbrush

How to Make Jewelry Cleaner:

The procedure is easy and straightforward:

1. Place the salt in the disposable aluminum foil container.
2. Follow the baking soda.
3. Mix them together.
4. Dissolve the mixture with enough dish detergent.
5. Add 1 cup of hot water with the measuring cup.
6. For the final step, put the mixture inside the spray bottle and you’re done! Your jewelry cleaner is now ready to use.

Continue to Content

Yield: 1 Bottle of Jewelry Cleaner

How to Make Jewelry Cleaner

Print

Learn how to make jewelry cleaner with household products to keep your baubles sparkling! Everything you need for this jewelry cleanser is available at the Dollar Tree.

Materials

• Detergent
• Salt
• Baking soda
• Spray bottle
• Disposable aluminum foil container

Instructions

1. Place the salt in the aluminum foil container.
2. Follow the baking soda.
3. Mix them together.
4. Dissolve the mixes with enough detergent.
5. Add 1 cup of hot water with the measuring cup.
6. For the final step, put the mixture inside the spray bottle to use.

Did you make this project?

Please leave a comment on the blog or share a photo on Instagram

It’s time to clean up! First, gather all of your jewelry pieces, including your wedding and engagement rings, and place them in the small bowl. Next, take your spray bottle filled with the cleaning solution and gently mist your jewelry. Make sure to cover all of the surfaces. Using a soft toothbrush, gently scrub each piece, paying special attention to any areas that are particularly dirty or tarnished. Always clean jewelry carefully – especially diamond rings, precious metals, etc.

After scrubbing, rinse each piece thoroughly with cool water and gently dry with a clean, lint-free cloth. For extra care, you can use an ultrasonic cleaner or a mild abrasive like baking soda to remove any tough stains.

Tips for DIY Jewelry Cleaning

For silver or silver-plated jewelry, you can also use a good silver polish. You can also use a mixture of baking soda and water to give them an extra shine. Avoid using harsh chemicals or ultrasonic cleaners on pearls or soft stones, as they can be damaged by these methods. Instead, simply wipe them down with a damp cloth or a soft-bristled toothbrush.

It’s important to clean your jewelry on a regular basis! Do this to remove any dirt, grime, or body oils that can accumulate over time. This will not only keep your jewelry looking beautiful, but it will also help to preserve it for future generations.

Another great tip for keeping your jewelry in top condition is to store it properly. Keep your pieces in a jewelry box or place jewelry in a soft cloth pouch. Try to avoid storing them in areas with high humidity or extreme temperatures.

Diamond Jewelry

When cleaning diamond jewelry, it’s best to avoid using ultrasonic cleaners or harsh chemicals. Instead, mix a solution of mild dish soap and water. Then use a soft toothbrush to gently scrub your diamond jewelry. Rinse thoroughly with clean water and dry with a lint-free cloth.

Gold Jewelry

For gold jewelry, you can use a mixture of mild dish soap and warm water. Soak your gold jewelry in the solution for a few minutes. After soaking, use a soft toothbrush to gently scrub away any dirt or grime. Rinse thoroughly and dry with a clean cloth. I keep an old toothbrush under the sink just for this type of task!

Costume Jewelry

For jewelry with glued components, avoid excessive water exposure, as it can weaken the adhesive. Use a slightly damp cloth to clean such pieces.

Be cautious while cleaning vintage or antique costume jewelry, as the materials may be more fragile. A professional jeweler can provide guidance on proper cleaning techniques for these pieces.

Avoid using harsh chemicals, ultrasonic cleaners, or steam cleaning methods, as these can damage the finish and stones of costume jewelry.

This easy homemade jewelry cleaner can also be used to clean tarnish off of your jewelry. For stubborn tarnish, create a paste by mixing a small amount of baking soda with water in a bowl. The consistency should be similar to toothpaste. Apply the paste onto the tarnished areas of the metal using a soft cloth or your fingers.
Gently rub the tarnished areas with the paste using circular motions. Be cautious not to apply too much pressure, especially if the item is delicate. Rinse the item thoroughly with warm water to remove the baking soda residue.

In conclusion, making your own jewelry cleaner at home is not only easy, but it’s also a cost-effective and environmentally friendly way to keep your treasured jewelry looking its best. So, next time you’re in need of a jewelry cleaner, give this simple homemade recipe a try, and see the difference for yourself! You’ll be glad you did and your favorite pieces of jewelry will thank you too.

CLEANING ARCHIVES

View our collection of cleaning tips and tricks!

VIEW POSTS